Ford Crown Victoria Bulb Size


*Headlightsize is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

2007 Ford Crown-victoria ChartBuy Bulb on Amazon
Headlight Bulb High Beam and Low Beam
Center High Mount Stop Light Bulb
Brake Light Bulb
Turn Signal Light Bulb Front
License Plate Light Bulb
Parking Light Bulb
Tail Light Bulb
Turn Signal Light Bulb Rear
Back Up Reverse Light Bulb
Side Marker Light Bulb Front
Side Marker Light Bulb Rear
Stepwell Light Bulb
Vanity Mirror Light Bulb
Glove Box Light Bulb
Trunk or Cargo Area Light
Dome Light Bulb
Map Light Bulb
Reading Light Bulb Rear
Engine Compartment Light Bulb
Instrument Panel Light Bulb
Turn Signal Indicator Light Bulb
High Beam Indicator Light Bulb
Check Engine Light Bulb

Even though the Ford Crown Victoria is a vehicle that lasted for only two decades, this V8 powered, the rear-wheel-drive sedan is one of the most popular vehicles in the US. As proof of their reliability is the fact that they were and still are excellent police cars. No matter how tough this little car is, some parts still need to be replaced, like the light bulbs.

The durability and popularity of the Ford Crown Victoria are further exemplified by its widespread use as a taxi. Its spacious interior and large trunk make it an ideal choice for carrying passengers and their luggage.

The car’s smooth ride and reliable handling also contribute to its enduring appeal in the taxi industry. Despite its robustness, routine maintenance is essential to keep it running smoothly. This includes regular oil changes, brake inspections, and tire rotations, ensuring that the Crown Victoria remains a dependable mode of transport for many years.

In addition to its commercial uses, the Ford Crown Victoria has a strong following among car enthusiasts. Its classic American sedan design, coupled with the powerful V8 engine, makes it a favorite for those who appreciate traditional car aesthetics and performance.

The car’s relatively simple mechanical design also appeals to DIY enthusiasts who enjoy maintaining and customizing their vehicles. While the Crown Victoria may no longer be in production, its legacy continues through the numerous vehicles that are still on the road, cherished by both professionals and enthusiasts alike.

Ford Crown Victoria Bulb Size

  • Combined high beam and low beam: 9007
  • Fog light: 9040
  • Reverse: 3156
  • Front turn signal: 3157
  • Rear turn signal: 4157
  • License plate: 168 / 194
  • Brake Taillight: 4157
  • Middle brake light: 912

Reasons for replacing the bulbs on a Ford Crown Victoria

LED bulbs have only begun to increase their popularity in the past decade or less, but with good reason. The reduced power consumption and long life make them excellent.

An ordinary halogen or HID bulb will last several thousand working hours, while an LED will easily surpass them and go over 30 thousand, some advertising even 50 thousand hours. In other words, you might need to replace them ever again.

The energy consumption is not something that people tend to think about in a car, but it is not something to be ignored. Every light in your vehicle gets its power from the alternator, so if a bulb is using more power, the alternator will need to work more to be able to power it. For LEDs, it can “relax” a bit more.

Replacing the headlight bulb on a Ford Crown Victoria

The design of the headlight might make you think that the procedure is complicated, but it is not. Once you open up the hood and disconnect the power, you can start with the replacement procedure.

Remove the plastic cover that goes over the headlights and the vehicle’s radiator. There are three screws that hold it that you can unscrew with your hand. Behind the headlight assembly, there are two plastic holders that you need to pull up in order to remove it. To replace the bulb, unscrew the bulb holder with the cable attached. Once that is done, you can put the headlight back in and put the plastic holders and cover on.

How to tell if my Ford Crown Victoria has LED lights?

It probably doesn’t. Even the second-generation Crown Victoria is an older model, manufactured in a time where LED lights were not available to a lot of models. There is a chance if you purchased it second-hand, and the previous owner replaced them. To verify, you will need to look at the bulbs.

Will replacing the headlights on a Ford Crown Victoria with LED have higher brightness?

Yes. Among the many advantages, LEDs have over halogen or HID is the fact that they are brighter, so your visibility will be better. Before replacing them, check your local laws in case there is a maximum brightness for headlights.

See Also

Using a Ford 302 V8 Engine’s Firing Order Navigation

Top 5 Similar Cars to Ford Crown Victoria: Competing Alternatives

Ford Crown Victoria Engine Swap Compatibility Chart

See More

Ford Crown Victoria bulb size

  • First generation (EN53; 1992–1997)
  • Second generation (EN114; 1998–2012)

Leave a Comment