Kia Forte Bulb Size


Kia Forte Bulb Size Chart

*Headlightsize is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

2021 Kia Forte ChartBuy Bulb on Amazon
Fog Light Bulb Front
Headlight Bulb High Beam
Headlight Bulb Low Beam
Center High Mount Stop Light Bulb
Brake Light Bulb
Turn Signal Light Bulb Front
License Plate Light Bulb
Parking Light Bulb
Tail Light Bulb
Turn Signal Light Bulb Rear
Side Marker Light Bulb Rear
Back Up Light Bulb
Map Light Bulb

The Kia Forte uses a variety of bulb types for its headlights and fog lights. This depends on the model year chosen by buyers. The latest models use a  900D5S bulb type for the low beam headlight, a 9005 bulb type for the high beam headlight, and an H8 bulb for the front fog light. 

Earlier modes use either the H11H7H11B, or D5S for the low beam headlight and a 9005, or H1 for the high beam headlight. The fog lights utilize either an H8 or 881 bulb type. 

The Kia Forte uses halogen bulbs for its lighting functions, rather than more expensive xenon or LED lighting options. A common problem with halogen bulbs is that they burn out over time due to constant use and changing conditions such as weather.

This requires you to buy replacement bulbs. Changing a burnt-out bulb is extremely easy, whether it is the front fog light, the low beam headlights or high beam headlights.5 bulb for the high-beam headlamps and a H11 bulb for the fog lights. The previous models were equipped with an H7 bulb for the low beams and 9005 halogen bulbs for the high beams.

The LED upgrade can be bought online or from any retailer that sells this product line. The same applies to the Philips Bright Blue Vision upgrade or OEM Philips Xtreme Power Change Vision Upgrade . Both series are available online.

Price points vary depending on where you buy them, but not by much. Expect to pay around $8 per pair of headlights . This is comparable to other upgrades like Sylvania Silver Star Light Bulbs , GE Nighthawk Platinum Headlight Bulbs orit Electric Supernova High Flux Halogen , which are all priced at around $8 per pair.

When shopping for headlights, it’s important to consider the overall value they offer. For instance, the Philips XtremeVision series is known for its superior brightness and extended lifespan, often costing slightly more at around $10 per pair.

In contrast, the Osram Night Breaker Unlimited boasts a remarkable range and intensity of light, typically priced at a similar range of $9 to $11 per pair. These differences, though seemingly small, can make a noticeable impact in terms of visibility and safety during night driving.

Headlight Bulbs By Year

2017 2018 2019

Headlight Bulb High Beam - 9005

Fahren 9005/HB3 LED Headlight Bulbs, 60W 12000 Lumens Super Bright LED Headlights Conversion Kit 6500K Cool White IP68 Waterproof, Pack of 2

Looking for a brighter, longer-lasting headlight bulb? Fahren's 9005 LED headlight bulbs are the perfect upgrade for your car. These bulbs provide 3 times the light of a standard halogen bulb. The whole aviation aluminum body and unique hollow-carved heat sink design keep your bulbs cool even under extended use, while the 12,000RPM turbo cool fan ensures a long lifespan of up to 50,000 hours.

Key Features:

  • Top Automotive-Grade LED chip inside

  • Power - 60 W.

  • Light Output - 12,000 Lm

  • Color Temperature - 6500K

Check On Amazon

Nilight 9005 LED Headlight Bulbs, 350% Brighter

Why we picked it: 

  • 【350% Brighter Than Halogens】 Equipped with high luminous efficacy CSP chips and 6000K cool white, E1 9005 LED headlight bulbs output 350% more brightness, providing further and wider visibility for you to see the deer, wild animals, falling rocks or other obstacles in advance to ensure safer driving at night

  • 【Ideal Beam Pattern】 Nilight HB3 LED headlight bulb enhances super focused beam pattern for optimal light shape to improve light concentration and clear visibility.

  • 【10 Mins Easy Installation】 All-in-one compact design, the built-in driver for taking up less space in housing, 1:1 mini size as original halogen bulbs for greater compatibility, real plug and play, quickly install in 10 mins.

  • 【50,000 Hours Lifespan】 65% energy saving, brighter light output with much less power consumption.

  • Check On Amazon

    AUXITO Upgraded 9005 HB3 LED Headlight Bulbs 6000K White, 100W 20000 Lumens 600% Brighter

    • 【300% Brighter Than Halogen】- Top Automotive-Grade LED chips with 60W, 12,000LM per pair, 6500K cool white. Super focused beam pattern design provides a wider and farther lighting range which is 3 times brighter than your original halogen bulb.

    • 【Over 5,0000 Hours Lifespan】 - Whole aviation aluminum body, unique hollow-carved heat sink design, and 1,2000RPM turbo cool fan provide super cooling ability, which ensures a longer lifespan up to 5,0000 hours.

    • 【10 Minutes Easy Installation】- Almost 1:1 mini design same as halogen, perfectly fit into your housing and factory sockets without any modification, just plug and play.

    Check On Amazon

    The LED upgrade will provide users with a brighter, crisper light that is whiter, rather than the yellowish tinge of standard halogen bulbs. It also provides more even light distribution and better beam patterns, which enhances visibility during night time driving. This results in safer night time travel.

    You may have purchased your Kia Forte used or you may be worried about voiding its warranty by installing new lighting upgrades. Fear not – the Philips Xenon White Vision lights are DOT certified to be street legal for use anywhere in the US, including states that require inspection before allowing vehicles on public roads. The Philips are engineered specifically for Kia Fortes sold in the US.

    The Kia Forte is known for its sleek, sporty styling that comes standard with halogen headlight bulbs. If you happen to live in an area where foggy conditions are common during the winter months, you might find it beneficial to upgrade your headlights with brighter LED bulbs . According to Xenon Expert , these lights provide a whiter light and a wider beam angle, illuminating more of the road ahead and reducing instances of odd-angled lighting caused by the original equipment halogen bulbs. The end result is enhanced visibility and safer driving during inclement weather

    Upgrading from factory bulbs to aftermarket LED/HID

    When upgrading to LED headlights, there are two ways to do it. One involves the use of an LED conversion kit and the other the use of retrofit-LED headlights. The former involves switching your existing headlights for a new set.

    The process could last at least one hour for each side, including disassembly. It’s highly important to do the fitment correctly to ensure rainwater does not penetrate into the headlight. 

    The second method is the retrofit-LED headlights or simply LED headlight bulbs. It’s a DIY job and takes about half an hour for each side. They are also waterproof and do not require any fitment approach with regard to water leakage.

    However, it’s important to note that some cars may come with optional high beam LED lights from the factory.

    In this instance, you don’t need to change your existing headlight configuration because these lights will work perfectly well on your vehicle if they were built into it from the factory.

    In more recent years, many automakers have been installing LED headlights as a standard feature of their vehicles which include Audi, Mercedes-Benz, and BMW among others. This means even if you own an older model, chances are that the headlights could be swapped for LED headlight bulbs.

    Most cars that employ LED headlights will place them in the lower housing of the headlight assembly. This makes it simple to replace standard-style halogen bulbs with new LED versions, which generally just require you to twist and pull your older model out so you can slide the replacement in its place. That’s all there is to it!

    The same applies for projector lenses since they are usually plug-and-play modules that only need to be pushed into their respective housing. A lot of these high quality aftermarket projector lens kits come with a clear lens upgrade too, which allows your factory sealed beam units to produce a crisp cutoff line while taking full advantage of your factory reflector housings.

    Professional installation is typically not required because these are very easy to install.

    With that being said, always check your owner’s manual so you can verify whether your vehicle is compatible with LED headlight bulbs prior to making a purchase.

    Now if you own some cars or trucks with halogen sealed beams, then it’s important to note that the bulb types are different and require specific LED headlight assemblies in order to function properly. However, many of these vehicles have separate high beam units which features an H7 style headlamp connector, thus allowing it work with any standard H7/H11 type LED light set that comes on the market today. This makes replacements quick and easy for this specific lighting type; however I would recommend checking both bulb positions before you make a purchase.

    It’s also necessary to keep in mind that LED headlights can cause a vehicle’s charging system to work harder and reduce power output. This is why some vehicles may experience dimming lights when LEDs are installed. Furthermore, you should check your car’s owner manual to determine if the wiring harness is capable of handling them without any issues or not.

    One way to avoid potential electrical problems is by selecting LED headlight assemblies which use load resistors instead of capacitors, since they generally do not affect performance regardless of what type of stock lighting system you have running on your car.

    As for complaints about LEDs in general, none exist that I know of because it’s only natural for people to compare their old

    To begin with, whether you go for LED or halogen headlights, it’s important to note that these bulbs function using specific voltage requirements.

    Simply put, the power required by one bulb is different from another type of bulb because each uses a different technology and emits light at varying levels of intensity.

    This difference may be small but should not be overlooked. It’s advisable to confirm your car’s specifications prior to buying any bulbs to ensure they fit well into your car’s electrical system.

    Further, if there is an accessory fuse box in your vehicle, then installing high-intensity discharge (HID) lamps might require a separate relay harness to work seamlessly.

    This relay harness isn’t usually included in the LED conversion kit you purchase so it would be advisable to take this into consideration along with other stuff like water sealing before embarking on any exterior lighting upgrade project.

    You also have to consider the fact that LED headlight bulbs are sensitive to heat and will lose brightness over time if they’re not designed for high temperatures.

    It’s important therefore to know whether your vehicle is known to accumulate plenty of heat, especially under the bonnet or near other engine parts or even hot components like exhaust tips.

    You can determine this by checking out your car’s maintenance information provided by the manufacturer, forums related to your make of car, websites dedicated to providing detailed performance data about specific makes of cars, and the experience of other motorists.

    Advantages of upgrading to LED/HID technology

    1. Improved night vision
    2. Energy efficiency
    3. Better aesthetics
    4. Improved road safety
    5. Longer lifespan

    How to choose the correct bulb size for LED/HID lamps

    1. Contact your vehicle manufacturer

    You can give your car manufacturer a call to inquire about your bulb sizes. Ensure you have your Vehicle Identification Number nearby to make the process of retrieving the information easier. 

    1. Vehicle manual

    Consult your vehicle manual any time you need to replace your car headlight bulbs. The manual will provide part/size numbers that show the correct bulb sizes for your Kia Forte. 

    1. Check your factory bulbs

    Alternatively, you can safely remove the old factory bulbs from your headlights to determine what size they are. Their part/size number should be indicated on the casing. 

    1. Online search

    Our Kia Forte light bulb replacement chart provides a comprehensive list of all the bulb sizes needed on a Kia Forte. All you need to do is key in your car’s model year to generate the results. 

    The Kia Forte’s headlights are exposed to the same wear and tear that any other car has. Over time, they might develop condensation inside. This can be a problem because it obscures your view while driving at night.

    But with a few simple tools and about an hour of spare time, you can fix your car’s headlights without taking them to a mechanic or having to buy expensive replacement parts.

    If done correctly, you should not notice any difference between this newly opened headlight and ones that cost hundreds of dollars more for replacement parts. You can save time and money by doing this yourself rather than taking them into the shop.

    Installing new bulbs

    1. Open the hood of your Kia Forte. 
    2. Locate the caps that protect the bulbs from the back of the headlight assembly. You may have to remove the battery on the driver’s side for easy access. 
    3. Rotate the cap counter-clockwise to remove it. 
    4. Remove the power connector by pushing on its side button. 
    5. Push the retaining clip that holds the bulb in place. 
    6. Remove the old bulb and replace it with a new one. 
    7. Clip it back into place and re-install the power connector. 
    8. Test your headlights to see if they work. 
    9. Return the caps and tighten them in place. 

    Additional equipment

    1. Latex gloves
    2. 10-12mm screwdriver 

    Q&A Section 

    1. What is headlight cutoff? 

    Cutoff helps to focus and direct your light beam to the side of the road you’re driving. This helps to point out street signs and other objects that are important to the driver. 

    Knowing the right Kia Forte bulb size is a must for a successful replacement of the dimmed or fused lamp. Did you know Kia Forte exterior and interior lighting system accommodates more than 30 lamp types?

    Bulb types and specs can differ between different generations so simply choose the year of production of your Kia Forte to find out the lamp type for your vehicle.

    Kia Forte Generations

    2009 – 2021   

    • Third generation (2019–present)
    • Second generation (2014–2018)
    • First generation (2009–2013)

    More on Kia Forte

    Before buying new rims or aftermarket wheels, check out your Kia Forte Wheel Size

    See Also

    Kia Forte ABS Light is On? What it Means and How to Reset

    Kia Forte Bad O2 Sensors: How to Diagnose & Fix

    How to Diagnose & Fix Common Kia Forte Coil Pack Problems

    See More

    Kia Forte headlight bulb    Kia Forte bulb size    Kia Forte bulb size chart

    Related Cars

    Volkswagen GTI, Mazda Mazda3, Honda Civic, Toyota Corolla, Hyundai Veloster, Chevrolet Cruze, Hyundai Elantra, Volkswagen Golf, Subaru Impreza, Volkswagen Jetta, Subaru WRX, Nissan Sentra

    Leave a Comment